- Store
- >
- All Instant Download PDF Patterns
- >
- Sewing Patterns Ladies PDF Downloads
- >
- Victorian Underbust Corset Sewing Pattern Instant Download Size Large
Victorian Underbust Corset Sewing Pattern Instant Download Size Large
SKU:
€7.50
€7.50
Unavailable
This is a classic under bust corset, Front busk or buckle opening and fully laced at the back. It has 10 -12 panels depending on pattern size and is fully steel boned. Detailed instructions are included with the pattern and there is ls a picture tutorial to make this in the tutorial section.
This listing is for size Large which has 32"-34"-36" (80-85-90 cm) FINISHED corset waist sizes.
PLEASE NOTE THESE ARE THE ACTUAL CORSET MEASUREMENTS AND YOU SHOULD GENERALLY CHOOSE A PATTERN WITH CORSET WAIST 3" TO 4" LESS THAN YOUR NATURAL WAIST.
This listing is for size Large which has 32"-34"-36" (80-85-90 cm) FINISHED corset waist sizes.
PLEASE NOTE THESE ARE THE ACTUAL CORSET MEASUREMENTS AND YOU SHOULD GENERALLY CHOOSE A PATTERN WITH CORSET WAIST 3" TO 4" LESS THAN YOUR NATURAL WAIST.
Pattern for corset only not the braces /shoulder straps.
Materials required:
Outer dress fabric for corset, approx 1 metre /yard
Interlining (good quality medium weight cotton/poly Cotton), approx .75 metre / 3/4 yard
heavy cotton drill or coutil for main lining, approx .75 metre 3/4 yard
quality bias binding, minimum 20 mm (3/4") wide double double folded
metal busk for fastening or buckles, leather straps and rivets,
flat steel bones for front and back and spiral bones for side channels,
eyelets and washers (grommets)
Reinforcing strips for eyelets, can be double layer petersham or coutil
eyelet setting tool,
4mm hole punch.
Outer dress fabric for corset, approx 1 metre /yard
Interlining (good quality medium weight cotton/poly Cotton), approx .75 metre / 3/4 yard
heavy cotton drill or coutil for main lining, approx .75 metre 3/4 yard
quality bias binding, minimum 20 mm (3/4") wide double double folded
metal busk for fastening or buckles, leather straps and rivets,
flat steel bones for front and back and spiral bones for side channels,
eyelets and washers (grommets)
Reinforcing strips for eyelets, can be double layer petersham or coutil
eyelet setting tool,
4mm hole punch.